|
|
It is possible that this page will report a problem where no problem exists. If you believe that this has happened, then please contact me (address at the bottom of this page) and explain clearly why you think this page is in error. Note that any changes that you make may take a few days to show up here, so please give it a week before commenting.
|
|
The site location should be at the mark shown -- or very close.
If the displayed location (or elevation) of the weather observing location is incorrect, please drag the marker to the right location (or click in the right location), and then send the updated information. Please note that we are trying to spot either the Stevenson Screen (or equivalent) or the location where the barometric readings are taken.
The location information for this site was gathered from 2 data sources. The source which most closely matches the consensus is chosen. Many of these sources only report the location to the nearest minute (or hundredth of degree). This can lead to the marker being placed noticeably incorrectly. Please see Discussion of Location Errors for more information. Show location history.
Latitude: dummy (deg min sec), dummy (decimal), dummy (LORAN)
Longitude: dummy (deg min sec), dummy (decimal), dummy (LORAN)
Estimated elevation is dummy metres (dummy feet) from dummy.
Location is dummy (reverse geocoded).
Move marker to new address.
There are no photographs of the station. If you have pictures of this location, then please email them to bcbc1@photo.gladstonefamily.net.
Once logged in, click on 'Upload Photos & Video'. Next click on 'Choose Photos and Videos', and walk through the process to upload your pictures. They will automatically be resized appropriately.
After the upload is complete, it will ask you to add titles, tags and descriptions. The key step is to add tags as follows:
If you had to create your account, then you must upload at least five pictures. It will also take longer for your pictures to appear (a week or so). Otherwise, the pictures should appear after 24-48 hours.
You can try to find photographs from the area surrounding the site marker by clicking on Find nearby photographs. (There are some) (There are none) (There may be some) (Automatically loaded if any)
All the means and standard deviations shown below are from the last 28 days. Change analysis period to Last 3 days Last 7 days Last 14 days Last 8 weeks Last 13 weeks Last 26 weeks Last 39 weeks Last 52 weeks
NOTE: If the error above is POSITIVE, then it means that the analysis temperature is HIGHER than the reported temperature. This means that your sensor is reading COLDER than expected. |
|
Latest daily graph:
These values are within the acceptable range. This probably means that your sensor is sited correctly and is calibrated correctly.
NOTE: If the error above is POSITIVE, then it means that the analysis temperature is HIGHER than the reported temperature. This means that your sensor is reading COLDER than expected. |
| |||||||||||||||||||||||||
Latest daily graph:
Your readings are not within an acceptable error range. The automated problem analysis cannot identify the problem. You can signup on the wxqc mailing list and post information about this situation there. This is may be caused by poor siting of the sensor (e.g. under eves, in screen porch, or in thick tree coverage). For information on siting, see CWOP Station Guide.
It appears that your relative humidity sensor is 'stuck' -- i.e. it reports the same value for extended periods of time. You should check that your relative humidity sensor is still working and is connected correctly. If you do not have a relative humidity sensor, then please check your software and adjust it so that it does not report relative humidity values.
| The wind vector is the average wind over the relevant period. Note that if the wind blows North for half the time at 2 knots, and then blows South for the other half of the time at 2 knots, then the result is zero -- i.e. North wind and South wind will cancel out. Over time, the direction of the wind and of the analysis should match pretty well. If the lengths of the vector are different, then it could mean either that your anemometer reads high or low, or that you are in a more shielded or more open space. |
|
| Today | Last 7 days | |
|---|---|---|
You can look at those for comparison purposes. The average difference between your station and each station below is listed as well. This may allow you to detect local stations which are erroneous. You can also use these numbers to adjust your instruments -- especially if a number of ASOS stations have similar differences to your station. Also, try increasing the analysis period to more than the default 28 days. The difference is only given if both stations report reasonably often during each day. Some stations only report every 6 hours, and this makes the average of less interest. In this case, the average is not displayed. The values reported are the differences between this station and the neighboring station. I.e. if the difference is positive, then this station is reading higher than the neighboring station. Since this station has not been reporting continuously during the analysis period (it missed 22 days out of 28), the offsets below may not be accurate.
You can also subscribe to an RSS feed to tell you when new stations come online in this area. Choose either within
100 miles 
or
250 miles .
For stations covered by your Forecast Office: San Joaquin Valley (HNX) .
| Site | Distance | Location | Barometer | Temperature | Dewpoint | ||
|---|---|---|---|---|---|---|---|
| FW7005 | 22.2 miles | West | Shaver Lake, CA, US (lat 37.0580°, long -119.1728°, altitude 1826 metres) | 22.3°F | -80.9°F | ||
| GW0353 | 34.6 miles | North | Crowley Lake, CA, US (lat 37.5660°, long -118.7372°, altitude 2107 metres) | 15.4°F | -71.3°F | ||
| GW0187 | 42.8 miles | West | Prather, CA, US (lat 36.9872°, long -119.5387°, altitude 262 metres) | 30.9°F | -94.4°F | ||
| WA6GRA | 49.3 miles | Southwest | DINUBA, CA, US (lat 36.5522°, long -119.3863°, altitude 106 metres) | 29.5°F | -97.8°F | ||
| DW1297 | 49.9 miles | West | Clovis, CA, US (lat 36.8507°, long -119.6312°, altitude 127 metres) | 30.6°F | -95.9°F | ||
| EW7937 | 52.7 miles | West | Clovis, CA, US (lat 36.8058°, long -119.6652°, altitude 115 metres) | 29.2°F | -96.7°F | ||
| DW3347 | 54.0 miles | West | Clovis, CA, US (lat 36.8620°, long -119.7122°, altitude 114 metres) | 29.8°F | -96.2°F | ||
| DW6283 | 54.7 miles | West | FRESNO, CA, US (lat 36.8970°, long -119.7370°, altitude 115 metres) | 31.5°F | -95.8°F | ||
| FW1241 | 58.2 miles | South | Exeter, CA, US (lat 36.2837°, long -119.1522°, altitude 113 metres) | 29.4°F | -97.9°F | ||
| FW7073 | 58.5 miles | Southwest | Visalia, CA, US (lat 36.3413°, long -119.3108°, altitude 104 metres) | 28.7°F | -98.1°F |
The 'MADIS rating' reports on the percentage of observations that pass the MADIS checks. You should aim for two thumbs up!
Degrees Minutes Seconds: VWS/VWSAPRS, WeatherLink 5.5, WeatherLink (5.2-5.4), WeatherView (Linux)
Decimal degrees: FreeWX, WeatherView32 (PC application)
LORAN: WeatherDisplay, WUHU, Henriksen WServer
CWOP Siting Guide (PDF): This is a guide to siting and operating a CWOP station. This is a must-read document.
Another CWOP Guide (PDF): This is another guide to siting and operating a CWOP station. This is a must-read document.
Urban Siting and Operations (PDF): This is a guide to siting and operating a CWOP station in an urban environment.
APRS WX Message format: This describes the actual format of the messages transmitted that carry WX information.
WXQC Mailing List: This is a mailing list where data quality issues are discussed. Assistance with software configuration can often be found here.
Topo Map Reading Guide: How to read USGS topographic maps, with a good section on reading contours.
Geographically nearby web pages: Use Geourl to find web pages that deal with locations geographically close to this site.
